Caution, Peration, Power height adjustment – Bissell 76X6 User Manual

Page 7: Special tools

Advertising
background image

7

w w w . b i s s e l l . c o m

Power height adjustment

The powerfoot on your vacuum can be

adjusted to clean several floor surfaces.

nOTE: for optimal cleaning performance,

adjust to the lowest practical setting. If

your cleaner is difficult to push, adjust to

the next higher setting.

1. Place handle in upright position.

2. Turn height adjustment knob to desired setting.

Lowest Setting

For bare floors.

Medium Settings – For short and medium

pile carpets.

Highest Setting

For plush pile carpet.

nOTE: you may also adjust the setting while

in the normal cleaning position.

Special tools

your vacuum is not only a powerful floor vacuum

cleaner, it’s also a versatile stairs and above floor

vacuum when you select one of the special tools.

note: The tools can be used with the

vacuum in the Upright Position or with the

Detachable Canister.

1. Detach the vacuum hose by grasping the

hose grip and lifting to separate from the

hose grip base.

2. Attach tools by firmly pushing onto vacuum

hose or telescoping extension wand.

Combination dusting brush/upholstery tool:

Two types of cleaning tools are included in one

attachment. Rotate for desired tool.

Use brush side to dust furniture, blinds, books,

lamps, shelves, and baseboards.

Use upholstery side for curtains, draperies,

cushions, fabrics.

Crevice tool:

Use in tight narrow spaces.
Telescoping extension wand:

Use with desired attachment for a longer reach. To

extend the wand, twist the collar to “Unlock” posi-

tion and push away from you. Twist the collar to the

“Lock” position to lock into place. To retract, twist to

unlock, pull toward you and twist to relock.

O

peration

Tip:

Before cleaning under

low furniture, check

area first for objects

that might harm the

unit or block the

Vacuum Hose.

CAUTIOn:

Always place vacuum cleaner on

floor in its fully Upright Position

and make sure it is locked into

place before removing Canister

or when using tools. Placing the

Lift-Off in its full Upright Position

automatically stops the

rotating brush.

1.

Advertising
This manual is related to the following products: