CHEVROLET CORVETTE 2005 - Manual (Page 134)

Turn Signal/Multifunction Lever
The lever on the left side of the steering column
includes the following:
• G Turn and Lane-Change Signals. See Turn and
Lane-Change Signals (Auto Signal) on page 3-8
• 3 Headlamp High/Low-Beam Changer. See
Headlamp High/Low-Beam Changer on page 3-9
• - Fog Lamps. See Fog Lamps on page 3-16
• Flash-to-Pass Feature. See Flash-to-Pass on
page 3-9.
• I
Cruise Control. See Cruise Control on
page 3-11.
• P
Exterior Lamps Control. See Exterior Lamps on
page 3-14.
Turn and Lane-Change Signals
(Auto Signal)
The turn signal has two upward (for right) and
two downward (for left) positions. These positions
allow you to signal a turn or a lane change.
To signal a turn, move the multifunction lever all the
way up or down. When the turn is finished, the lever will
return automatically.
An arrow on the instrument
panel cluster will flash in
the direction of the
turn or lane change.
To signal a lane change, just raise or lower the lever
until the arrow starts to flash. Release the lever and the
turn signal will automatically flash three times. If
more flashes are desired, continue to hold the lever.
If you signal a turn or a lane change and the
arrows flash faster than normal, a signal bulb
may be burned out.
If a bulb is burned out, replace it to help avoid an
accident. If the arrows do not go on at all when you
signal a turn, check the fuses and check for burned-out
bulbs. See Fuses and Circuit Breakers on page 5-87.
3-8