Headlamp high/low-beam changer, Flash-to-pass, Windshield wipers – CHEVROLET CORVETTE 2005 User Manual

Page 135: Windshield, Wipers

Advertising
background image

Turn Signal on Chime

A chime will remind you if you leave the turn signal on
for more than three-quarters of a mile (1.2 km) of driving.

If you need to leave the turn signal on for more than
three-quarters of a mile (1.2 km), turn off the signal and
then turn it back on.

Headlamp High/Low-Beam Changer

To change the headlamps from low beam to high or high
to low, push the turn signal lever all the way forward.

While the high beams are
on, this light on the
instrument panel cluster
also will be on. To change
the headlamps from
high to low, pull the
lever rearward.

Flash-to-Pass

To use the flash-to-pass feature, momentarily pull the
turn signal lever toward you. The high-beam indicator
will flash to indicate to the other driver that you intend to
pass. If the low-beam headlamps are off and you
have the optional fog lamps on, the fog lamps will flash.

Windshield Wipers

Use the lever located on the right side of the steering
column to operate the windshield wipers.

1

(High Speed): Move the lever to this position for

steady wiping at high speed.

6

(Low Speed): Move the lever to this position for

steady wiping at low speed.

&

(Delay): Move the lever to this position to set a

delay between wipes.

3-9

Advertising