EXEDY ET03SD Standard Twin FORD - Manual (Page 7)

！
！
！
！
7. Warning
Caution: If the clutch is used in the half engaged position for
extended periods of time,
the clutch set will generate high temperatures. This high heat
creates expansion or deformation which causes
disengagement problems temporarily or permanently. If this
occurs stop driving and allow the clutch to cool down. For
maximum friction surface temperatures see over.
8. Warning
Do not machine any part of this product, otherwise the
strength of each part will be reduced and may fail
prematurely.
9. Warning
The bolts have to be tightened at the specified torque.
The mating surfaces should be cleaned, wiped with a clean
towel to remove any foreign waste they may affect the
performance of the clutch.
10. Warning
The bolts are the very important parts. Use either genuine
parts or the bolts included as auxiliary parts in the box.
Do not reuse the old bolts after un-tightening.
M190 -7-