On journeys – BMW 525i Sedan 2005 User Manual

Page 50

Advertising
background image

Co

n

tr

o

ls

49

Re

fe

re

n

c

e

At

a

g

la

n

c

e

D

riv

in

g ti

ps

C

o

mm

uni

cati

o

n

Na

v

iga

ti

on

En

te

rt

a

in

m

e

n

t

M

o

bi

lity

between the head restraint and the seat back. It
is recommended to readjust the head restraint
into the lowest possible position.
Center sitting position:
Pull the center armrest forward somewhat to
guide the tether strap through the opening.
Then reengage the center armrest.

Adjust the tether strap according to the
child-restraint manufacturer's instruc-

tions.

<

LATCH child-restraint fixing system

LATCH: Lower Anchor and Tethers for CHil-
dren.
The rear outer sitting positions are provided
with anchors for a LATCH child-restraint fixing
system.

To attach the LATCH child-restraint fix-
ing system, follow the operating and

safety instructions of the manufacturer.

<

Access to anchorage points on rear
seat with through-loading system

The illustration shows the left rear seat as an
example.

The anchorage points for the LATCH child-
restraint fixing system are located underneath
the identifying symbols.
Before attaching the LATCH child-restraint fix-
ing system, pull the belt out of the region of the
child-restraint fixing system.

Access to anchorage points on rear

seat with through-loading system

The illustration shows the right rear seat as an
example.
The anchorage points for the LATCH child-
restraint fixing system are located behind the
indicated protective caps.
Before attaching the child-restraint fixing sys-
tem, remove the LATCH protective caps and
pull the belt away from the region of the child-
restraint fixing system.

On journeys

If the rear is equipped with side airbags,
make sure that children do not lean out of

the child's seat towards the door panels. Other-
wise severe injuries can be caused if the side
airbags are triggered.

<

Online Edition for Part-No. 01 41 0 158 518 - © 09/04 BMW AG

Advertising
This manual is related to the following products: