BMW 525i Sedan 2005 - Manual (Page 74)

Co
n
tr
o
ls
73
Re
fe
re
n
c
e
At
a
g
la
n
c
e
D
riv
in
g ti
ps
C
o
mm
uni
cati
o
n
Na
v
iga
ti
on
En
te
rt
a
in
m
e
n
t
M
o
bi
lity
Starting and stopping
> Select "Start" and press the controller.
The stopwatch starts at the displayed time.
> Select "Reset" and press the controller.
The stopwatch is reset and it restarts if it
was running beforehand.
> Select "Stop" and press the controller.
This stops the timer.
Taking an intermediate time reading
Select "Interim time" and press the controller.
The interim time appears below the ongoing
primary stopwatch count.
All of the remaining functions remain
available at all times while the stopwatch
is running. The stopwatch continues operation
in the background.
<
Settings on Control Display
Brightness of Control Display
The brightness is automatically adapted to the
ambient lighting conditions. However, you can
change the base setting.
Control Center, for principle details, refer to
page
16 .
1. Press button.
This opens the start menu.
2. Press the controller to open the menu.
3. Select "Display settings" and press the
controller.
4. Select "Brightness" and press the control-
ler.
5. If necessary, move the controller to the right
to select "Display Offset".
6. Turn the controller until the desired setting
is selected.
The setting is stored for the remote control cur-
rently in use.
Measurement units
You can change the measurement units for
consumption, distances, temperature and
pressure.
1. Open the menu.
2. Select "Display settings" and press the
controller.
3. Select "Units" and press the controller.
4. Select the menu item to be set.
5. Press the controller.
6. Select the desired measurement unit and
press the controller.
The settings are stored for the remote control
currently in use.
Online Edition for Part-No. 01 41 0 158 518 - © 09/04 BMW AG