Eve ryth ing un de r co nt rol, Speed limit, Stopwatch – BMW 525i Sedan 2005 User Manual
Page 73
E
ve
ryth
ing un
de
r co
nt
rol
72
3.
Press the controller.
Speed limit
You can enter a speed and a Check Control
message indicates when you have reached this
speed. This enables you, for example, to
receive warnings if you exceed a speed limit in
an urban area.
You are only warned of reaching this speed a
second time if your vehicle speed falls below it
again by at least 3 mph/5 km/h.
Entering, changing
Control Center, for principle details, refer to
page
.
1.
Open "Navigation".
In vehicles without a navigation system:
Open "Car Data".
2.
Select "Car Data" and press the controller.
3.
Select "Limit" and press the controller.
4.
Select the speed and press the controller.
5.
Turn the controller to set the limit. If
needed, hold it against a slight resistance to
enter a larger difference.
6.
Press the controller to apply the setting.
Applying your current speed as limit
Control Center, for principle details, refer to
page
1.
Open "Navigation".
In vehicles without a navigation system:
Open "Car Data".
2.
Select "Car Data" and press the controller.
3.
Select "Limit" and press the controller.
4.
Select "Select current speed" and press
the controller. The system adopts your cur-
rent speed as the limit.
Activating limit
Control Center, for principle details, refer to
page
1.
Open "Navigation".
In vehicles without a navigation system:
Open "Car Data".
2.
Select "Car Data" and press the controller.
3.
Select "Limit" and press the controller.
4.
Select "On" and press the controller.
Limit is activated.
Stopwatch
Control Center, for principle details, refer to
page
1.
Open "Navigation".
In vehicles without a navigation system:
Open "Car Data".
2.
Select "Car Data" and press the controller.
3.
Select "Stopwatch" and press the control-
ler.
Online Edition for Part-No. 01 41 0 158 518 - © 09/04 BMW AG