Location of the spare tire and tools, Removing the jack and tools, 350 wheels and tires – FORD 2015 Expedition User Manual

Page 351

Advertising
background image

WARNING: Always use the jack provided as original equipment
with your vehicle. If using a jack other than the one provided as

original equipment with your vehicle, make sure the jack capacity is
adequate for the vehicle weight, including any vehicle cargo or
modifications.

WARNING: Disable the power running boards before jacking,
lifting, or placing any object under the vehicle. Never place your

hand between the power running board and vehicle as extended power
running boards will retract when the doors are closed. Failure to follow
these instructions may result in personal injury.

Note: Passengers should not remain in the vehicle when the vehicle is
being jacked.

Park on a level surface, set the parking brake, and activate the hazard
flashers. Place the transmission in park (P) and turn the engine off.

Location of the Spare Tire and Tools

The spare tire and tools for your vehicle are stowed in the following
locations:

Item

Location

Spare tire

Under the vehicle, just forward of
the rear bumper

Jack tools

Under the access panel located in
the floor compartment behind the
rear seat

Removing the Jack and Tools

1. Open the liftgate, then locate the
access panel on the floor behind the
third row seat. Unlatch and remove
the panel.

2. Remove the jack and tools
assembly tray from the compartment
by turning the wing-nut
counterclockwise. Remove the bag
from the jack and tool assembly tray
by loosening the strap.

350

Wheels and Tires

2015 Expedition (exd)
Owners Guide gf, 1st Printing, July 2014
USA
(fus)

Advertising