Safety belt warning light and indicator chime, Conditions of operation, Safety belts 41 – FORD 2015 Expedition User Manual

Page 42

Advertising
background image

To adjust the comfort guide:

1. Slip the shoulder belt into the
belt guide (the portion of the belt
between the latch tongue and the
D-ring, not the portion where the
belt exits from the quarter trim
panel).

2. Slide the guide up or down along the webbing so that the belt is
centered on the occupant’s shoulder.

SAFETY BELT WARNING LIGHT AND INDICATOR CHIME

This lamp illuminates and an audible warning will sound if the
driver’s safety belt has not been fastened when the vehicle’s
ignition is turned on.

Conditions of Operation

If...

Then...

The driver safety belt is not
buckled before the ignition
switch is turned to the on
position...

The safety belt warning light
illuminates 1-2 minutes and the
warning chime sounds 4-8 seconds.

The driver safety belt is
buckled while the indicator
light is illuminated and the
warning chime is sounding...

The safety belt warning light and
warning chime turn off.

The driver safety belt is
buckled before the ignition
switch is turned to the on
position...

The safety belt warning light and
indicator chime remain off.

Safety Belts

41

2015 Expedition (exd)
Owners Guide gf, 1st Printing, July 2014
USA
(fus)

Advertising