160 seats – FORD 2015 Flex User Manual

Page 161

Advertising
background image

If the engine falls below 350 RPM while the cooled seats are on, the
feature will turn itself off. You will need to reactivate it.

Note: When the heated or cooled front seat is active, you will be able to
hear the fan operating inside the seat. This is normal.

Climate Controlled Seat Air Filter Replacement (If Equipped)

The climate controlled seat system includes air filters. You must replace
them periodically. See the scheduled maintenance information.

Locate the filters under each front seat and access them from the
second-row foot-well area. Move the front seats all the way forward and
to the full up positions to ease access.

To remove an air filter:

1. Turn the vehicle off.

2. Push up on the outside rigid edge
of the filter and rotate
counterclockwise once the tabs are
released, then remove the filter.

To install a filter:

1. First, position the filter in its
housing making sure that the far
forward end is all the way up in the
housing.

2. Push in on the center of the
outside edge of the filter and rotate
up into the housing until it clips
into position.

160

Seats

2015 Flex (471)
Owners Guide gf, 1st Printing, October 2014
USA
(fus)

Advertising