Deactivating the park assist feature, Troubleshooting the system, Parking aids 221 – FORD 2015 Flex User Manual

Page 222

Advertising
background image

Deactivating the Park Assist Feature

The system can be deactivated manually by:
• pressing the active park assist button
• grabbing the steering wheel
• driving above approximately 20 mph (35 km/h) for 30 seconds during

an active park search

• driving above 6 mph (10 km/h) during automatic steering
• turning off the traction control system.
Certain vehicle conditions can also deactivate the system:
• Traction control has activated on a slippery or loose surface.
• Anti-lock brake system activation or failure.
• Any door (except the driver’s) opens.
• Something touches the steering wheel.
If a problem occurs with the system, a warning message is displayed,
followed by a chime. Occasional active park assist messages may occur in
normal operation. For recurring or frequent active park assist faults,
contact an authorized dealer to have your vehicle serviced.

Troubleshooting the System

The system does not look for a space

The traction control system may be off

Any door (except the driver’s) may not be completely closed

The system does not offer a particular space

Something may be contacting the front bumper or side sensors

There is not enough room on both sides of the vehicle in order to park

There is not enough space for the parking maneuver on the opposite
side of the parking space

The vehicle is farther than 5 ft (1.5 m) from the parking space

The vehicle is closer than 16 in. (40 cm) from neighboring parked
vehicles

The transmission is in R (Reverse); the vehicle must be moving
forward to detect a parking space

The vehicle is going faster than 20 mph (35 km/h)

Parking Aids

221

2015 Flex (471)
Owners Guide gf, 1st Printing, October 2014
USA
(fus)

Advertising