Locking the doors, Activating intelligent access (if equipped), At the front doors – FORD 2015 Flex User Manual

Page 76: At the liftgate, Locks 75

Advertising
background image

Locking the Doors

Press the button to lock all the doors. The turn signals will
illuminate.

Press the button again within three seconds to confirm that all the doors
are closed. The doors will lock again, the horn will sound and the turn
signals will illuminate if all the doors and the luggage compartment are
closed.

Note: If any door or the luggage compartment is open, or if the hood is
open on vehicles with an anti-theft alarm or remote start, the horn
sounds twice and the lamps will not flash.

Activating Intelligent Access (If Equipped)

You must have the intelligent access key within 3 feet (1 meter) of your
vehicle.

At the Front Doors

Pull a front exterior door handle to unlock and open the door. The
unlock sensor is on the back of the handle. Make sure not to touch the
lock sensor area on the front of the handle.

Press and hold the lock sensor area
for about a second to lock your
vehicle. To avoid unlocking the door
inadvertently, make sure to only
touch the lock sensor and not other
areas of the door handle.

After locking the doors with the
lock sensor, there is a brief delay

before you can unlock your vehicle. This delay lets you pull the door
handle to make sure it locked.

Note: Keep the door handle surface clean to avoid issues with operation.

At the Liftgate

Press the button hidden near the license plate.

Locks

75

2015 Flex (471)
Owners Guide gf, 1st Printing, October 2014
USA
(fus)

Advertising