FORD 2015 Focus Electric - Manual (Page 152)

To Connect the Booster Cables
A
B
C D
E102925
Vehicle with low charge battery A
Booster battery vehicle B
Positive connection cable C
Negative connection cable D
WARNINGS
Do not connect directly to the
negative (–) terminal of the battery
with low charge. A spark may cause
an explosion of the gases that surround
the battery or a surge within the battery.
Make sure that the cables are clear
of any moving parts. Failure to follow
this warning could result in serious
personal injury or death.
1. Position the vehicles so that they do
not touch one another.
2. Switch off the electric motor and any
electrical equipment.
3. Connect the positive (+) terminal of
vehicle B with the positive (+) terminal
of vehicle A (cable C). Battery positions
may vary.
E152134
4. Connect the negative (-) terminal of
vehicle B to the ground connection of
vehicle A (cable D).
To Start Your Vehicle
1. Run the engine of vehicle B at a
moderately high speed.
2. Move the transmission selector lever
of vehicle A to position P.
3. Switch on the ready to drive mode. See
Starting the Electric Motor (page
112).
4. Run both vehicles for a minimum of
three minutes before disconnecting the
cables.
Note: Do not switch the headlamps on
when disconnecting the cables. The peak
voltage could blow the bulbs.
Disconnect the cables in the reverse order.
149
Focus (CDH), enUSA, First Printing
Roadside Emergencies