Keys and remote controls – FORD 2015 Focus Electric User Manual

Page 51

Advertising
background image

Sounding the Panic Alarm

(If Equipped)

E138624

Press the button to activate the
alarm. Press the button again or
switch your vehicle on to

deactivate it.

Note: The panic alarm only operates when
your vehicle is switched off.

Remote Start

E138625

The remote start button is on the
transmitter.

This feature allows you to start your
vehicle from the outside. The transmitter
has an extended operating range.

Vehicles with automatic climate control
can be configured to operate when your
vehicle is remote started. See Automatic
Climate Control (page 100).

Many states and provinces have
restrictions for the use of remote start.
Check your local and state or provincial
laws for specific requirements regarding
remote start systems.

The remote start system does not work if
any of the following occur:

Your vehicle is switched on.

The alarm system activates.

You turn off the feature.

The hood is open.

The transmission is not in park (P).

Your vehicle battery has no charge.

The powertrain fault indicator was on
the last time you drove your vehicle.

Remote Starting your Vehicle

Note: You must press each button within
three seconds of each other. If you do not
follow this sequence, your vehicle does not
start remotely, the direction indicators do
not flash twice and the horn does not sound.

E138626

The label on your transmitter details the
starting procedure.

To remote start your vehicle:

1.

Press the lock button to lock all the
doors.

2. Press the remote start button twice.

The direction indicators flash twice.

The horn sounds if the system fails to start,
unless quiet start is on. Quiet start runs the
blower fan at a slower speed to reduce
noise. You can switch the feature on or off
using the information display. See (page
86).

The power windows do not work during
remote start and the radio does not turn
on automatically.

The parking lamps remain on and your
vehicle runs for 5, 10 or 15 minutes,
depending on the setting.

Note: If you remote start your vehicle with
an intelligent access transmitter, you must
press the START STOP button on the
instrument panel once while applying the
brake pedal before driving your vehicle.

Extending the Remote Start Running
Time

To extend the remote start running time
duration of your vehicle during remote
start, repeat steps 1 and 2 while your
vehicle is running. For example, if your
vehicle had been running from the first
remote start for 5 minutes, your vehicle

48

Focus (CDH), enUSA, First Printing

Keys and Remote Controls

Advertising