Maintenance – FORD 2015 Mustang User Manual

Page 228

Advertising
background image

4. Pull the wheel liner back toward the

tire to gain access to the bulbs.

Replacing the Direction Indicator
Bulbs

E180889

1.

Remove the bulb holder from the lamp
assembly by turning it
counterclockwise.

2. Disconnect the electrical connector.

3. Remove the bulb from the bulb holder

by pulling it straight out.

Replacing Fog Lamp Bulbs (If
Equipped)

1.

Make sure the lighting control is in the
off position.

2. Disconnect the electrical connector

from the bulb by pulling it straight off.

E174588

3. Rotate the bulb counterclockwise and

remove from the fog lamp assembly.

4. Install the bulb in reverse order.

Replacing LED Fog Lamp Bulbs (If

Equipped)

These lamps have LED bulbs. Contact an
authorized dealer.

Replacing Reverse Lamp Bulbs

1.

Make sure the lighting control is in the
off position.

2. Locate the reverse lamp bulb under the

rear bumper of your vehicle. To access
the bulb, reach behind the bumper.

3. Disconnect the electrical sensor from

the bulb by pulling it straight off.

E177487

4. Rotate the bulb counterclockwise and

remove it from the reverse lamp
assembly.

Replacing rear, Brake, High-Mount
Brake, Rear Direction Indicator and
License Plate Lamp Bulbs

These lamps have LED bulbs. Contact an
authorized dealer.

225

Mustang (), enUSA, First Printing

Maintenance

Advertising