Sync, Pairing subsequent phones, Phone voice commands – FORD 2015 Mustang User Manual
Page 303
Depending on your phone's capability and
your market, the system may prompt you
with questions, such as setting the current
phone as the primary phone (the phone
SYNC automatically tries to connect with
first upon vehicle start-up) and
downloading your phonebook.
Pairing Subsequent Phones
Note: Make sure to switch on the ignition
and the radio. Put the transmission in park
(P).
Note: To scroll through the menus, press
the up and down arrows on your audio
system.
1.
Make sure to switch on your phone's
Bluetooth feature before starting the
search. See your device's manual if
necessary.
2. Press the PHONE button.
3. Select the option for Bluetooth
Devices.
4. Press the OK button.
5. Select the option to add. This starts
the pairing process.
6. When a message to begin pairing
appears in the audio display, search for
SYNC on your device.
7.
When prompted on your phone's
display, enter the six-digit PIN provided
by the system in the audio display. The
display indicates when the pairing is
successful.
Depending on your phone's capability and
your market, the system may prompt you
with questions, such as setting the current
phone as the primary phone (the phone
SYNC automatically tries to connect with
first upon vehicle start-up) and
downloading your phonebook.
Phone Voice Commands
E142599
Press the voice button. When
prompted, say any of the
following:
"PHONE"
"Call <name>"
"Call <name> at home"
"Call <name> at work"
"Call <name> on cell"
"Call <name> on other"
"Dial"
1
"Go to handsfree"
2
"Hold call <on> <off>"
2
"Join calls"
2
"Messages"
3
"Mute call"
2
"Phone help"
"Privacy on"
2
"Turn ringer <on> <off>"
"Unmute call"
2
1
See Dial table below.
2
This commands are only valid while in a
phone call.
3
See Messages table below.
300
Mustang (), enUSA, First Printing
SYNC™
(If Equipped)