Post-crash alert system, Roadside emergencies – FORD 2015 Transit v.1 User Manual

Page 183

Advertising
background image

4

1

3

2

E142665

1.

Remove the jumper cable from the
grounding connection point of the
vehicle with the discharged battery.

2. Remove the jumper cable on the

negative (-) terminal of the booster
vehicle's battery.

3. Remove the jumper cable from the

positive (+) terminal of the booster
vehicle's battery.

4. Remove the jumper cable from the

positive (+) access terminal of the
vehicle with the discharged battery.

After you start the disabled vehicle and
remove the jumper cables, allow your
vehicle to idle for several minutes so the
battery can recharge.

POST-CRASH ALERT SYSTEM

The system flashes the turn signal lamps
and sounds the horn (intermittently) in the
event of a serious impact that deploys an
airbag (front, side, side curtain or Safety
Canopy) or the safety belt pretensioners.

The horn and lamps will turn off when:

You press the hazard control button.

You press the panic button on the
remote entry transmitter (if equipped).

Your vehicle runs out of power.

180

Transit (TTH) Canada/United States of America, enUSA, Edition date: 03/2014

Roadside Emergencies

Advertising