Checking the wiper blades, Changing the wiper blades, Adjusting the headlamps – FORD 2015 Transit v.1 User Manual

Page 218: Maintenance

Advertising
background image

Install in the reverse order.

CHECKING THE WIPER
BLADES

E142463

Run the tip of your fingers over the edge of
the blade to check for roughness.

Clean the wiper blades with washer fluid
or water applied with a soft sponge or
cloth.

CHANGING THE WIPER
BLADES

Changing the Windshield Wiper
Blades

Lift the wiper arm.

E72899

1

2

1.

Press the locking button.

2. Remove the wiper blade.
3. Install in the reverse order. Make sure

that the wiper blade locks into place.

Note: The windshield wiper blades are
different in length. If you install wiper blades
of the wrong length, the rain sensor may not
work correctly.

ADJUSTING THE HEADLAMPS

Vertical Aim Adjustment

If your vehicle has been involved in a crash,
have the aim of the headlamp beam
checked by an authorized dealer.

Headlamp Aiming Target

E142592

8 feet (2.4 meters)

A

Ground to the center of the
headlamp bulb

B

25 feet (7.6 meters)

C

Horizontal reference line

D

Vertical Aim Adjustment Procedure

1.

Park your vehicle on level ground
approximately 25 feet (7.6 meters)
from a wall or screen.

2. Measure the distance from the ground

to the center of the headlamp bulb and
mark an 8 foot (2.4 meter) long
horizontal reference line on the wall or
screen at this height.

215

Transit (TTH) Canada/United States of America, enUSA, Edition date: 03/2014

Maintenance

Advertising