Child safety – FORD 2015 Transit v.1 User Manual

Page 24

Advertising
background image

E178096

3. Locate the correct anchor on the back

panel of the rear seat for the selected
seating position. The anchors are
labeled with the tether strap symbol
and are partially covered by the gap
panel. Pull the panel back to fully
expose the anchors.

4. Clip the tether strap to the anchor as

shown.

5. Adjust the front passenger seat full

rearward.

6. Tighten the child safety seat tether

strap according to the manufacturer's
instructions. If your child restraint
system is equipped with a tether strap,
and the child restraint manufacturer
recommends its use, Ford also
recommends its use.

Rear Seats

1.

Route the child safety seat tether strap
over the back of the seat, under the
head restraint and between the head
restraint posts.

E177640

21

Transit (TTH) Canada/United States of America, enUSA, Edition date: 03/2014

Child Safety

Advertising