Starting and stopping the vehicle, General information, Keyless starting – FORD 2014 Focus Electric User Manual

Page 140: Ignition modes, Starting and stopping the vehicle 139

Advertising
background image

GENERAL INFORMATION

The powertrain control system meets all Canadian interference-causing
equipment standard requirements regulating the impulse electrical field
or radio noise.

KEYLESS STARTING

Note: The keyless starting system may not function if the key is close to
metal objects or electronic devices such as cellular phones.

Note: A valid key must be located inside your vehicle to switch the
ignition on and start the vehicle.

Note: When locking your vehicle, any remote controls left inside the
vehicle may become disabled. A message may appear in the information
display indicating that there is no key detected if you try to start the
vehicle. Press the unlock button on the remote control to enable it, and
then start the vehicle.

Ignition Modes

Off: Turns the ignition off.

• Without applying the brake pedal, press and release the button once

when the ignition is in the on mode, or when the vehicle is on but
not moving.

On: All electrical circuits are operational. Warning lamps and indicators
are illuminated.

• Without applying the brake pedal, press and release the button once

from off mode.

Start: Starts the vehicle.

• Press the brake pedal, and then press the button for a couple

seconds. The green Ready to Drive indicator light appears in the
instrument cluster when the vehicle is ready for driving.

Starting and Stopping the Vehicle

139

2014 Focus Electric Vehicle (fob)
Owners Guide gf, 1st Printing, May 2013
USA
(fus)

Advertising