Intelligent access transmitter, Car finder, Sounding a panic alarm – FORD 2014 Focus Electric User Manual

Page 58: Keys and remote control 57

Advertising
background image

Intelligent Access Transmitter

1. Remove the backup key from the transmitter.

2. Twist a thin coin under the tab
hidden behind the backup key head
to remove the battery cover. Do not
use the backup key to remove the
cover or you could damage the
intelligent access key.

3. Remove the old battery.

4. Insert a new battery with the + facing downward. Press the battery
down to make sure it is fully in the housing.

5. Snap the battery cover back onto the transmitter and install the
backup key.

Car Finder

Press the button twice within three seconds. The horn will sound
and the turn signals will flash. We recommend you use this
method to locate your vehicle, rather than using the panic alarm.

Sounding a Panic Alarm

Press the button to activate the alarm. Press the button again
or switch the ignition on to deactivate.

Note: The panic alarm will only operate when the ignition is off.

Keys and Remote Control

57

2014 Focus Electric Vehicle (fob)
Owners Guide gf, 1st Printing, May 2013
USA
(fus)

Advertising