Using adaptive cruise control, See using adaptive cruise, Cruise control – FORD 2014 Fusion v.2 User Manual

Page 180

Advertising
background image

USING ADAPTIVE CRUISE
CONTROL

(IF EQUIPPED)

WARNINGS

Always pay close attention to
changing road conditions, especially
when using adaptive cruise control.

Adaptive cruise control cannot replace
attentive driving. Failing to follow any of
the warnings below or failing to pay
attention to the road may result in a crash,
serious injury or death.

Adaptive cruise control is not a crash
warning or avoidance system.

Adaptive cruise control will not
detect stationary or slow moving
vehicles below 6 mph (10 km/h).

Adaptive cruise control will not
detect pedestrians or objects in the
roadway.

Adaptive cruise control will not
detect oncoming vehicles in the
same lane.

Do not use the adaptive cruise
control when entering or leaving a
highway, in heavy traffic or on roads

that are winding, slippery or unpaved.

Do not use in poor visibility,
specifically fog, rain, spray or snow.

Note: It is your responsibility to stay alert,
drive safely and be in control of the vehicle
at all times.

The system adjusts your speed to maintain
a proper distance between you and the
vehicle in front of you in the same lane. You
can select from one of four gap settings.

E144501

The controls for using your cruise control
are located on the steering wheel.

Switching the System On

Press and release ON.

E144529

The information display will
show the grey indicator light.

E164805

The current gap setting and SET will also
display.

Setting a Speed

1.

Accelerate to the desired speed.

2. Press and release SET+. The vehicle

speed will be stored in the memory.

3. The information display will show a

green indicator light, current gap
setting and desired set speed.

4. Take your foot off the accelerator

pedal.

178

Fusion (CC7)

Cruise Control

Advertising