FORD 2014 Fusion v.2 - Manual (Page 99)

Action Message
Select park for the system to restart the engine. Auto StartStop Shift to
P Restart Engine
The system is not functioning. A manual restart is required. Auto StartStop Manual
Restart Required
Displays when conditions are not met for the Auto StartStop
system to function properly See Auto-Start-Stop (page 141). Auto StartStop Not
Available
StartStop has shutoff the engine automatically. Engine Stopped
StartStop is starting the engine automatically. Engine Starting
The wheels are at a sharp angle or the steering wheel is being
turned.
Engine On due to Vehicle
Maneuvering
The wheels are at a sharp angle or the steering wheel is being
turned.
Engine On due to
Steering Wheel Maneuv-
ering
Engine may be on to support high demand for electrical
accessories, such as operating power windows, rear defroster,
or when using the power point.
Engine On due to
Accessory Usage
Engine is on to support normal vehicle operation. Includes
external vehicle conditions, such as altitude, traffic, low
ambient temperature. Also includes battery outside optimal
operating conditions (state of charge and temperature), and
inadequate brake vacuum (can occur if the brake pedal is
depressed a number of times in succession).
Engine On Normal Oper-
ation
Engine is on in order to increase the engine temperature to an
acceptable level.
Engine On due to Low
Temperature
Engine is on to support normal vehicle operation due to low
outside ambient temperature.
Engine On due to
Outside Air Temp
Engine is on in order to increase the engine temperature to an
acceptable level.
Engine On due to Engine
Warming
Engine is on due to a low gear selection by the transmission. Engine On due to
Selected Gear
Engine is on due to a steep road grade. Engine On due to Steep
Grade
Engine is on due to no key being detected by the vehicle. Engine On due to Key not
Detected
97
Fusion (CC7)
Information Displays