FORD 2014 Fusion v.2 - Manual (Page 292)

Ford part number /
Ford specification
Ford part name or
equivalent
Capacity Item
/ WSH-M1C231-A
1 Ford recommends using Motorcraft (Ford) DOT 4 LV High Performance Brake Fluid, or
equivalent meeting WSS-M6C65-A2. Use of any fluid other than the recommended fluid
may cause degraded brake performance and not meet the Ford performance standards.
Keep brake fluid clean and dry. Contamination with dirt, water, petroleum products or
other materials may result in brake system damage and possible failure.
2 Approximate dry fill capacity. Actual amount may vary during fluid changes.
3 Automatic transmissions that require Motorcraft MERCON LV transmission fluid should
only use Motorcraft MERCON LV transmission fluid.
Use of any fluid other than the recommended fluid may cause transmission damage.
Change the automatic transmission fluid and filter at the correct service interval. See
Scheduled Maintenance (page 425).
4 See your authorized dealer for fluid level checking or filling.
5 We have designed your engine to use Motorcraft engine oils or equivalent oils brands
that meet our specifications. Motor oils of the recommended viscosity grade that meets
API SN requirements and displays the API certification mark for gasoline engines are also
acceptable.
6 Do not use API category oils labeled as SN, SM, SL or lower category unless the label
also display the API certification mark. These oils so not meet the requirements of your
engine and emission systems.
7 Do not use supplemental engine oil additives in your engine. They are unnecessary and
could lead to engine damage not covered by your Ford warranty.
8 Add the coolant type originally equipped in your vehicle.
9 See the Warning below:
WARNING
The air conditioning refrigerant system contains refrigerant R-134a under high
pressure. Opening the air conditioning refrigerant system can cause personal injury.
Have the air conditioning refrigerant system serviced only by qualified personnel.
290
Fusion (CC7)
Capacities and Specifications