Using advancetrac, 200 stability control – FORD 2014 Taurus v.2 User Manual

Page 201

Advertising
background image

USING ADVANCETRAC®

The system automatically activates when you start your engine. The
electronic stability control portion of the system is disabled when the
transmission is in reverse (R) or, on SHO models, if you press the ESC
OFF switch and hold it for more than five seconds when the brakes are
applied and the vehicle is at a stop. You can turn off the traction control
portion of the system independently. See the Traction Control chapter.

AdvanceTrac Features

Button
functions

Mode

Icon

status

ESC

TCS

Default at
start-up

On during

bulb

check

Enabled

Enabled

Button pressed
momentarily

Traction

control off

On

Enabled

Disabled

Button pressed
twice; brakes
applied

Sport mode

(SHO with

performance

pack only)

On

Enabled

Enabled

Button pressed
and held more
than 5 seconds;
brakes applied;
no throttle

AdvanceTrac

Disabled (SHO

with

performance

pack only)

On

Disabled

Disabled

Button pressed
again after
deactivation

AdvanceTrac
fully enabled

Off

Enabled

Enabled

The SHO model is equipped with a sport mode which allows the driver
to reduce normal AdvanceTrac system intervention and provide a more
spirited driving experience. To enter sport mode, press the stability
control button twice rapidly with the brakes applied. The message
appears in the information display that the system is now in sport mode.

Note: Sport mode is not intended to be used on public roadways.

200

Stability Control

2014 Taurus
Owners Guide gf, 2nd Printing, September 2013
USA
(fus)

Advertising