Safety belts 39 – FORD 2014 Taurus v.2 User Manual

Page 40

Advertising
background image

If...

Then...

The driver’s or front
passenger’s safety belt becomes
unbuckled for about one
minute while the vehicle is
traveling at least 6 mph
(9.7 km/h) and more than
1-2 minutes have elapsed since
the ignition switch has been
turned to on...

The Belt-Minder feature is activated -
the safety belt warning light
illuminates and the warning chime
sounds for six seconds every
25 seconds, repeating for about five
minutes or until the safety belts are
buckled.

Deactivating and Activating the Belt-Minder® Feature

WARNING: While the design allows you to deactivate your
Belt-Minder, this system is designed to improve your chances of

being safely belted and surviving an accident. We recommend you leave
the Belt-Minder system activated for yourself and others who may use
your vehicle. To reduce the risk of injury, do not deactivate or activate
the Belt-Minder feature while driving your vehicle.

Note: You can activate and deactivate the driver and front passenger
Belt-Minder independently. When deactivating or activating one seating
position, do not buckle the other position as this will terminate the
process.

Read Steps 1 - 5 thoroughly before proceeding with the programming
procedure.

Note: If you are using MyKey, you cannot disable Belt-Minder. Also, if
the Belt-Minder has been previously disabled, it will be re-enabled during
the use of MyKey. See the MyKey chapter.

You can activate and deactivate this feature by performing the following
procedure:

Before following the procedure, make sure that:
• The parking brake is set.
• The transmission is in park P.
• The ignition is off.
• The driver and front passenger safety belts are unbuckled.

Safety Belts

39

2014 Taurus
Owners Guide gf, 2nd Printing, September 2013
USA
(fus)

Advertising