Switching the systems off and on, Collision warning system (if equipped), Collision warning system – FORD 2014 Taurus v.2 User Manual

Page 234: Driving aids 233

Advertising
background image

Switching the Systems Off and On

One or both systems can be switched off temporarily by using the
information display control; refer to the Information Display chapter.
When the BLIS® is switched off, the driver does not receive alerts and
the information display shows BLIND SPOT SYS OFF and/or CTA
SYSTEM OFF. The system switches back on whenever the ignition is
switched on.

One or both systems can also be switched off permanently at your
authorized dealer. Once switched off, switching it back on must also be
done at the dealership.

COLLISION WARNING SYSTEM (IF EQUIPPED)

WARNING: This system is designed to be a supplementary
driving aid. It is not intended to replace the driver’s attention,

and judgment, or the need to apply the brakes. This system does NOT
activate the brakes automatically. Failure to press the brake pedal to
activate the brakes may result in a collision.

WARNING: The collision warning system with brake support
cannot help prevent all collisions. Do not rely on this system to

replace driver judgment and the need to maintain distance and speed.

Note: The system does not detect, warn or respond to potential
collisions with vehicles to the rear or sides of the vehicle.

Note: The collision warning system is active at speeds above
approximately 5 mph (8 km/h).

This system is designed to alert
the driver of certain collision risks.
A radar detects if your vehicle is
rapidly approaching another vehicle
traveling in the same direction as
yours.

Driving Aids

233

2014 Taurus
Owners Guide gf, 2nd Printing, September 2013
USA
(fus)

Advertising