FORD 2014 Transit Connect v.3 - Manual (Page 200)

6. Install the air filter housing cover.
7.
Install the retaining screws to secure
the air filter housing cover to the air
filter housing.
2.5L Engine
E167022
x2
1. Release the clamps that secure the air
filter housing cover.
2. Carefully lift the air filter housing cover.
3. Remove the air filter element from the
air filter housing.
4. Wipe any dirt or debris from the air filter
housing and cover to make sure no dirt
gets in the engine and to make sure you
have a good seal.
5. Install a new air filter element. Be
careful not to crimp the filter element
edges between the air filter housing
and cover. This could cause filter
damage and allow unfiltered air to
enter the engine if not properly seated.
6. Install the air filter housing cover.
7.
Engage the clamps to secure the air
filter housing cover to the air filter
housing.
TECHNICAL SPECIFICATIONS
WARNING
The air conditioning refrigerant
system contains refrigerant R-134a
under high pressure. Only qualified
personnel should service the air
conditioning refrigerant system. Opening
the air conditioning refrigerant system can
cause personal injury.
Capacities
Capacity Item
6.3 qt (6 L) Engine cooling system
4.3 qt (4.05 L) Engine lubrication system - including the oil filter
4.0 qt (3.75 L) Engine lubrication system - excluding the oil filter
0.8 qt (0.75 L) Engine oil top-up - raise the level on the dipstick
from minimum to maximum
197
Tourneo Connect/Transit Connect (CHC) Canada/United States of America, enUSA, Edition date: 07/2013
Maintenance