FORD 2013 C-MAX Hybrid v.3 - Manual (Page 153)

H. Instrument panel: Press to distribute air through the instrument
panel air vents.
I. Footwell: Press to distribute air through the footwell air vents.
J. Air conditioning: Press to switch the air conditioning off and on.
Air conditioning cools your vehicle using outside air. To improve air
conditioning when starting your vehicle, drive with the windows slightly
open for two to three minutes.
Temperature Control
You can set the temperature between 60°F (15.5°C) and 85°F (29.5°C)
in 1°F (0.5°C) increments. In position LO, 59°F (15°C), the system
switches to permanent cooling. In position HI, 86°F (30°C), the system
switches to permanent heating.
Note: If you select either position LO or HI, the system does not
regulate a stable temperature.
Single Zone (Driver Temperature Control)
In this mode, the driver’s control sets the temperature for both sides.
If you adjust the setting using the rotary control on the driver’s side,
the system sets the passenger’s side to the same temperature.
Dual Zone Temperature Control
Select a temperature for the passenger’s side using the rotary control
on the passenger’s side. Mono mode automatically switches off. The
temperature on the driver’s side remains unchanged. You can now adjust
the driver’s side and passenger’s side temperatures independently of each
another. Both temperature settings appear in the display.
Switching Back to Single Zone
Press and hold the AUTO button. The passenger’s side temperature
changes to the driver’s side temperature setting.
152 Climate Control
2013 C-Max Full Hybrid (34h)
Owners Guide gf, 3rd Printing, January 2013
USA (fus)