High voltage battery 207 – FORD 2013 C-MAX Hybrid v.3 User Manual

Page 208

Advertising
background image

Power (green light) — this indicator lights up when the cord is
plugged into the AC wall outlet.

Charge (green light) — Indicates status of charging:
• No light means the cord is not connected to the vehicle.
• Blinking light means that the charging is in process.
• Solid light means that the vehicle is connected but not charging.
Fault (red triangle light) — Lights up in case of a detected failure.
No charging is possible:
• Blinking red triangle light – means that the 120 volt convenience cord

is trying to reset the failure and could restart the charging cycle.

• Solid red triangle light – means that the fault is permanent. The cord

needs to be unplugged and re-plugged to reset the fault. If the fault
persists, contact your authorized dealer.

Charge Port and Light Ring

The charge port is located between
the front left side door and front
left wheel well. There is an
indentation located on the charge
port door. Press with your thumb to
press to open and close the door.

Note: Do not force the charge port door open or closed. Forcing the
door open or closed will damage the charge port.

The light ring located around the charge port indicates the charge status
of your vehicle’s high-voltage battery. The charge port light ring is
divided into four quadrants which display state of charge in 25 percent
increments.

There is a cord acknowledgment feature that will be activated when a
charge cycle is initiated. The four light quadrants will each individually
flash clockwise starting with the top right light and ending with the top
left, two full times confirming a charging coupler has been detected.

High Voltage Battery

207

2013 C-Max Full Hybrid (34h)
Owners Guide gf, 3rd Printing, January 2013
USA
(fus)

Advertising
This manual is related to the following products: