Intelligent access key (type 2), Car finder, Sounding a panic alarm (if equipped) – FORD 2013 C-MAX Hybrid v.3 User Manual

Page 63: 62 keys and remote control

Advertising
background image

6. Install a new battery with the + facing downward.

7. Assemble the two halves of the transmitter back together.

8. Install the key blade.

Intelligent Access Key (Type 2)

1. Remove the backup key from the transmitter.

2. Twist a thin coin under the tab
hidden behind the backup key head
to remove the battery cover. Do not
use the backup key to remove the
cover or you could damage the
intelligent access key.

3. Remove the old battery.

4. Insert a new battery with the + facing downward. Press the battery
down to make sure it is fully in the housing.

5. Snap the battery cover back onto the transmitter and install the
backup key.

Car Finder

Press the lock button on the key twice within three seconds. The horn
will sound and the turn signals will flash. We recommend you use this
method to locate your vehicle, rather than using the panic alarm.

Sounding a Panic Alarm (If Equipped)

Press the button to activate the alarm. Press the button again
or switch the ignition on to deactivate.

Note: The panic alarm will only operate when the ignition is off.

62

Keys and Remote Control

2013 C-Max Full Hybrid (34h)
Owners Guide gf, 3rd Printing, January 2013
USA
(fus)

Advertising
This manual is related to the following products: