FORD 2013 C-MAX Hybrid v.3 - Manual (Page 321)

4. Install the carpet to the cargo area.
5. Remove the painter’s tape from the liftgate latch.
6. Close the liftgate.
Note: If you disconnected the negative battery cable, it will be necessary
to reset memory features. See Changing the Low Voltage Battery.
Low voltage battery (C-MAX Energi)
Complete the following steps:
1. Check and recharge the low voltage battery as necessary. Keep
connections clean.
2. If you disconnected the negative battery cable, connect the negative
battery cable to the low voltage battery.
3. Install the low voltage battery access panel to the rear of the cargo
area.
4. Remove the painter’s tape from the liftgate latch.
5. Close the liftgate.
Note: If you disconnected the negative battery cable, it will be necessary
to reset memory features. See Changing the Low Voltage Battery.
Contact your authorized dealer if you have any concerns or issues.
320 Vehicle Care
2013 C-Max Full Hybrid (34h)
Owners Guide gf, 3rd Printing, January 2013
USA (fus)