FORD 2013 Expedition v.1 - Manual (Page 352)

12. Raise the vehicle to provide sufficient ground clearance when
installing the spare tire; approximately 1/4 inch (6 mm).
• Front
• Rear
• Jack at the specified locations to avoid damage to the vehicle.
13. Remove the lug nuts with the lug wrench.
14. Replace the flat tire with the spare tire, making sure the valve stem
is facing outward.
15. Reinstall the lug nuts until the wheel is snug against the hub. Do not
fully tighten the lug nuts until the wheel has been lowered.
16. Lower the wheel by turning the jack handle counterclockwise.
17. Remove the jack and fully
tighten the lug nuts in the order
shown and reinstall the wheel cover.
See Wheel Lug Nut Torque
Specifications later in this chapter
for the proper lug nut torque
specification.
1
3
5
4
6
2
352 Wheels and Tires
2013 Expedition (exd)
Owners Guide gf, 1st Printing
USA (fus)