Returning the seat to the seating position, Seats 167 – FORD 2013 F-150 v.1 User Manual

Page 167

Advertising
background image

Returning the Seat to the Seating Position

WARNING: Make sure that cargo or any objects are not trapped
underneath the seat cushion before returning the seat cushion to

its original position, and that the seat cushion locks into place. Failure
to do so may prevent the seat from operating properly in the event of a
crash, which could increase the risk of serious injury.

1. Pull the control on the side of the seat to release the seat cushion
from the storage position.

2. Push the seat cushion down until it locks into the horizontal position.

Folding Up the Rear Seats (SuperCrew Vehicles Only)

The rear seat has a split 60/40 cushion. Each seat cushion can be flipped
up into a vertical storage position.

Rotate the seat cushion up by lifting
on the corner until it locks into the
vertical storage position.

Note: The handle on the bottom of the seat cushion does not need to be
pulled to lift the seat cushion to the storage position.

Seats

167

2013 F-150 (f12)
Owners Guide gf, 1st Printing
USA
(fus)

Advertising