Head restraints, Front seat head restraints (if equipped), 136 seats – FORD 2013 Mustang v.3 User Manual

Page 137

Advertising
background image

HEAD RESTRAINTS

WARNING: To minimize the risk of neck injury in the event of a
crash, the driver and passenger occupants should not sit in or

operate the vehicle, until the head restraint is placed in its proper
position. The driver should never adjust the head restraint while the
vehicle is in motion.

WARNING: The adjustable head restraint is a safety device.
Whenever possible it should be installed and properly adjusted

when the seat is occupied.

WARNING: Install the head restraint properly to minimize the
risk of neck injury in the event of a crash.

Note: Before adjusting any head restraint, adjust the seat back to an
upright driving or riding position. Properly adjust the head restraint so
that the top of the head restraint is even with the top of your head and
positioned as close as possible to the back of your head. For occupants
of extremely tall stature, adjust the head restraint to its full up position.

To adjust the head restraint, do the following:

Front Seat Head Restraints
(If Equipped)

The head restraints consist of:
A. An energy absorbing head
restraint
B. Two steel stems
C. Guide sleeve adjust and release
button
D. Guide sleeve unlock and remove
button

• Raise: Pull up on the head restraint (A).
• Lower: Press and hold the guide sleeve adjust and release button (C)

and push down on the head restraint (A).

• Remove: Pull up the head restraint until it reaches the highest

adjustment position and then press and hold both the adjust and
release button (C) and the unlock and remove button (D), then pull
up on the head restraint.

A

B

D

C

136

Seats

2013 05+ Mustang (197)
Owners Guide gf, 3rd Printing
USA
(fus)

Advertising