FORD 2012 Fiesta v.1 - Manual (Page 18)

mi (km) TRIP — Trip odometer: Registers the mileage of individual
journeys.
mi (km) TO E — Distance to empty (if equipped): Indicates the
approximate distance the vehicle will travel on the fuel remaining in the
tank. Changes in driving pattern may cause the value to vary.
AVG MPG (l/100km) — Average fuel consumption (if equipped):
Indicates the average fuel consumption since the function was last reset.
AVG MPH (KM/H) — Average speed (if equipped): Indicates the
average speed calculated since the function was last reset.
XXX °F (°C) — Outside air temperature (if equipped): Shows the
outside air temperature.
To reset the trip odometer and average speed, scroll to the required
display and press and hold the end of the multifunction lever.
MULTIFUNCTION DISPLAY
Your vehicle’s multifunction display is capable of monitoring many vehicle
systems and will alert you to potential vehicle problems and various
conditions with an informational message. You can also program various
vehicle settings using the message center.
The display is located in the center stack.
Certain settings can be changed
through the multifunction display.
Press MENU on the audio system to
access the settings screen.
Press / / / to move
through the display screen. The
following settings can be changed:
Audio: See Audio systems in the Entertainment Systems chapter for
more information.
Vehicle: Select Vehicle then move right to enter into the menu. Scroll up
or down to select from:
• Traction Control: Move right to enter the menu and then move up
or down to select from on or off. Press OK to confirm.
• Chimes: Move right to enter the menu, then up or down to select
from warning chimes or info chimes. Press OK to confirm.
• Lane change indicator/Turn indicator: Move right to enter the
menu and then move up or down to select from flash once or flash
three times. Press OK to confirm.
Instrument Cluster
18
2012 Fiesta (fie)
Owners Guide, 1st Printing
USA (fus)