FORD 2011 Explorer v.3 - Manual (Page 278)

To turn off traction control in the AdvanceTrac
௡ system, select traction
control off in the message center. Full features of the AdvanceTrac
௡
system can be restored by selecting it on again or by turning off and
restarting the engine.
If you switch off traction control in
the AdvanceTrac
௡ with RSC௡
system, the stability control off light
will illuminate steadily. Selecting
traction control on again will turn
off the stability control off light.
Note: In R (Reverse), ABS and the engine traction control and brake
traction control features will continue to function; however, ESC, RSC
௡
and Curve Control are disabled.
Note: Curve Control can be disabled with the terrain management
control (if equipped). See Terrain Management later in this chapter.
AdvanceTrac
௡ Features
Operation Mode
Stability
control
light
( )
Message
center display
TCS
Default at start-up
System
initialization
Turns on
at
start-up
None Enabled
Selected once
Traction
control off
On
TRACTION
CONTROL OFF
Disabled
Selected again
after deactivation AdvanceTrac
௡
fully enabled
Off
TRACTION
CONTROL ON
Enabled
Note: The ESC/RSC
௡/Curve Control systems cannot be turned on or off
through the message center.
Trailer sway control
When properly equipped, trailer sway control will use the vehicle’s
AdvanceTrac
௡ with RSC௡ system to detect and help reduce trailer sway
by applying brake force at individual wheels and, if necessary, by
reducing engine power. Trailer sway control is only enabled above
40 mph (64 km/h).
OFF
Driving
278
2011 Explorer (exp)
Owners Guide, 4th Printing
USA (fus)