Settings/vehicle settings, Instrument cluster – FORD 2011 Explorer v.3 User Manual
Page 34
2. Record the highway fuel economy for future reference.
It is important to reset fuel economy after setting the speed control to
get accurate highway fuel economy readings.
For more information refer to Essentials of good fuel economy in the
Maintenance and Specifications chapter.
Settings/Vehicle Settings
In this mode, you can configure different driver setting choices. Press
the right arrow key (when in the Settings menu) to reach the listed
modes below:
Note: Some items are optional and may not appear.
Driver Assist
Traction Control
On / Off
Blind Spot
On (default on key cycle) / Off
Collision Warning Sensitivity
High / Normal / Low
Chimes
On (default on key cycle) / Off
Warn
On (default on key cycle) / Off
Cross Traffic
On (default on key cycle) / Off
Cruise Control
Adaptive or Normal
Rear Park Aid
On (default on key cycle) / Off
Trailer Sway
On (default on key cycle) / Off
Vehicle
Autolamp Delay
Off, 10 / 20 (default setting) / 30 / 60 / 90 / 120 /
180 seconds
Easy Entry/Exit
On / Off
Fuel
DTE Calculation
Normal or Towing
Locks
Autolock,
On / Off
Autounlock
On / Off
Remote
Unlocking
All doors / Driver’s door
Menu Control
Standard / Memory On
Oil Life Reset
Set to 10–100%
Power Liftgate
Enable / Disable
Instrument Cluster
34
2011 Explorer (exp)
Owners Guide, 4th Printing
USA (fus)