Engine data, Engine drivebelt routing, Identifying your vehicle – FORD 2011 Explorer v.3 User Manual
Page 408: Safety compliance certification label, Maintenance and specifications
Advertising
ENGINE DATA
Engine
3.5L V6 engine
Cubic inches
213
Required fuel
Minimum 87 octane
Firing order
1-4-2-5-3-6
Ignition system
EDIS
Spark plug gap
0.049–0.053 inch
(1.25–1.35mm)
Compression ratio
10.8 :1
Engine drivebelt routing
IDENTIFYING YOUR VEHICLE
Safety Compliance Certification Label
The National Highway Traffic Safety
Administration Regulations require
that a Safety Compliance
Certification Label be affixed to a
vehicle and prescribe where the
Safety Compliance Certification
Label may be located. The Safety
Compliance Certification Label is
located on the structure (B-Pillar)
by the trailing edge of the driver’s
door or the edge of the driver’s
door.
Maintenance and Specifications
408
2011 Explorer (exp)
Owners Guide, 4th Printing
USA (fus)
Advertising
This manual is related to the following products: