Safety belt height adjustment, Safety belt warning light and indicator chime, Conditions of operation – FORD 2011 Fusion v.1 User Manual

Page 138: Seating and safety restraints

Advertising
background image

WARNING: Do not use extensions to change the fit of the
shoulder belt across the torso.

Safety belt height adjustment

Your vehicle has safety belt height
adjustments at the front outboard
seating positions. Adjust the height
of the shoulder belt so the belt rests
across the middle of your shoulder.

To adjust the shoulder belt height,
pull on the center button and slide
the height adjuster up or down.
Release the button and pull down
on the height adjuster to make sure
it is locked in place.

WARNING: Position the safety belt height adjusters so that the
belt rests across the middle of your shoulder. Failure to adjust

the safety belt properly could reduce the effectiveness of the safety
belt and increase the risk of injury in a collision.

Safety belt warning light and indicator chime

The safety belt warning light illuminates in the instrument cluster and a
chime sounds to remind the occupants to fasten their safety belts.

Conditions of operation

If...

Then...

The driver’s safety belt is not buckled
before the ignition switch is turned to
the on position...

The safety belt warning light
illuminates 1-2 minutes and the
warning chime sounds
4-8 seconds.

The driver’s safety belt is buckled
while the indicator light is illuminated
and the warning chime is sounding...

The safety belt warning light
and warning chime turn off.

The driver’s safety belt is buckled
before the ignition switch is turned to
the on position...

The safety belt warning light
and indicator chime remain off.

Seating and Safety Restraints

138

2011 Fusion (fsn)
Owners Guide, 1st Printing
USA
(fus)

Advertising