Exterior mirrors, Power side view mirrors, Blind spot mirrors (if equipped) – FORD 2011 Fusion v.1 User Manual

Page 81: Driver controls

Advertising
background image

Do not clean the housing or glass of any mirror with harsh
abrasives, fuel or other petroleum-based cleaning products.

Note: If equipped with a rearview camera system, a video image will
display in the mirror or the navigation system display (if equipped) when
the vehicle is put in R (Reverse). As you shift into any other gear from R
(Reverse), the image will remain for a few seconds and then turn off.
Refer to Rearview camera system in the Driving chapter.

EXTERIOR MIRRORS

Power side view mirrors

WARNING: Do not adjust the mirror while the vehicle is in
motion.

To adjust your mirrors:

1. Rotate the control clockwise to
adjust the right mirror and rotate
the control counterclockwise to
adjust the left mirror.

2. Move the control in the direction
you wish to tilt the mirror.

3. Return to the center position to lock mirrors in place.

Heated mirrors (if equipped)

Both mirrors are heated automatically to remove ice, mist and fog when
the rear window defrost is activated.

Do not remove ice from the mirrors with a scraper or attempt to
readjust the mirror glass if it is frozen in place. These actions
could cause damage to the glass and mirrors.

Blind spot mirrors (if equipped)

Your vehicle may be equipped with blind spot mirrors or a blind spot
information system. Refer to Blind spot mirrors or Blind spot
information system (BLIS

) with cross traffic alert (CTA) in the

Driving chapter.

Driver Controls

81

2011 Fusion (fsn)
Owners Guide, 1st Printing
USA
(fus)

Advertising