FORD 2010 Transit Connect v.3 - Manual (Page 195)

2. Start the engine of the disabled vehicle.
3. Once the disabled vehicle has been started, run both engines for an
additional three minutes before disconnecting the jumper cables.
Removing the jumper cables
Remove the jumper cables in the reverse order that they were
connected.
1. Remove the jumper cable from the ground metal surface.
Note: In the illustrations, lightning bolts are used to designate the
assisting (boosting) battery.
2. Remove the jumper cable on the negative (-) connection of the
booster vehicle’s battery.
+ –
+ –
+ –
+ –
Roadside Emergencies
195
2010 Transit Connect (tst)
Owners Guide, 3rd Printing
USA (fus)