Vehicle sensitive mode, Automatic locking mode, When to use the automatic locking mode – FORD 2010 Transit Connect v.3 User Manual

Page 87: How to use the automatic locking mode, Seating and safety restraints

Advertising
background image

All safety restraints in the vehicle are combination lap and shoulder
belts. All of the passenger combination lap and shoulder belts have three
types of locking modes described below:

Vehicle sensitive mode

This is the normal retractor mode, which allows free shoulder belt length
adjustment to your movements and locking in response to vehicle
movement. For example, if the driver brakes suddenly or turns a corner
sharply, or the vehicle receives an impact of approximately 5 mph
(8 km/h) or more, the combination safety belts will lock to help reduce
forward movement of the driver and passengers.

Automatic locking mode

When to use the automatic locking mode

In this mode, the shoulder belt is automatically pre-locked. The belt will
still retract to remove any slack in the shoulder belt. The automatic
locking mode is not available on the driver safety belt.

This mode should be used any time a child safety seat, except a
booster, is installed in passenger front or rear seating position (if
equipped). Children 12 years old and under should be properly
restrained in a rear seating position whenever possible. Refer to Safety
restraints for children
or Safety seats for children later in this chapter.

How to use the automatic locking mode
• Buckle the combination lap and

shoulder belt.

Seating and Safety Restraints

87

2010 Transit Connect (tst)
Owners Guide, 3rd Printing
USA
(fus)

Advertising