FORD 2009 Crown Victoria v.1 - Manual (Page 58)

Reducing speed while using speed control
There are two ways to reduce a set
speed:
• Press and hold the SET - control
until you get to the desired
speed, then release the control.
You can also use the SET -
control to operate the Tap-Down
function. Press and release this
control to decrease the vehicle
set speed in small amounts by
1 mph (1.6 km/h).
• Depress the brake pedal until the
desired vehicle speed is reached,
press the SET + control.
Turning off speed control
There are two ways to turn off the speed control:
• Depress the brake pedal. This will
not erase your vehicle’s
previously set speed.
• Press the speed control OFF
control.
Note: When you turn the speed
control or the ignition off, your
speed control set speed memory is
erased.
2009 Crown Victoria (cro)
Owners Guide, 1st Printing
USA (fus)
Driver Controls
58