Auto-relock, Auto-unlock, Locks and security – FORD 2009 Crown Victoria v.1 User Manual

Page 71

Advertising
background image

Auto-relock

The autolock feature repeats when:
• a door is opened and closed while the engine is running,
• you shift into any gear, putting the vehicle in motion, and
• the vehicle’s speed is greater than 3 mph (5 km/h).
Auto-unlock

The auto-unlock feature will unlock all doors when:
• the ignition has been in the on position, all doors are closed, and the

vehicle has been in motion at a speed greater than 12 mph (20 km/h),

• the vehicle has then come to a stop and the ignition is turned to the

accessory or off position, and

• the driver door is opened {within ten minutes after the ignition was

transitioned to the accessory or off position}.

Note: The vehicle doors will not auto-unlock if the vehicle has been
electronically locked prior to the driver door being opened.

Deactivating/activating the autolock or auto-unlock feature

Automatic door locks can also be turned on/off through the following
procedure:

You must complete Steps 1-7 within 30 seconds or the procedure will
have to be repeated. If the procedure needs to be repeated, you must
wait at least 30 seconds. Note: Before following the procedure, make
sure that the ignition is in the off position and all vehicle doors, the
hood, and the decklid are closed.

1. Turn the ignition to the on
position.

2. Press the power door unlock
control on the door panel three
times.

3. Turn the ignition from the on to
the off position.

4. Press the power door unlock control three times.

5. Turn the ignition back to the on position.

6. The door locks will lock/unlock to confirm programming mode is
entered/active.

2009 Crown Victoria (cro)
Owners Guide, 1st Printing
USA
(fus)

Locks and Security

71

Advertising