FORD 2009 Escape v.1 - Manual (Page 43)

14. Driver heated seat control (if equipped): Press to
activate/adjective the driver heated seat. See Heated seats in the
Seating and Safety Restraints chapter.
Outside temperature: The outside temperature will appear in the
display and is labeled EXT TEMP.
Temperature conversion: To switch between Fahrenheit and Celsius: If
your vehicle is equipped with a message center, refer to Setup menu in
the Message center section of the Driver Controls chapter.
Operating tips
• To reduce fog build up on the windshield during humid weather,
select (defrost) or (floor/defrost).
• To reduce humidity build up inside the vehicle, do not drive with the
system OFF or with (recirculated air) engaged and A/C off.
• Do not put objects under the front seats that will interfere with the
airflow to the back seats.
• Remove any snow, ice or leaves from the air intake area at the base of
the windshield.
• To improve the A/C cool down, drive with the windows slightly open
for 2-3 minutes after start up or until the vehicle has been “aired out.”
During extreme high ambient temperatures when idling stationary for
extended periods of time in gear, it is recommended to run the A/C in
the MAX A/C position, reduce blower fan speed from the highest setting
and put the vehicle’s transmission into the PARK gear position
(automatic transmission only) to continue to receive cool air from your
A/C system.
For maximum cooling performance:
• Automatic operation:
1. Press AUTO for full automatic operation.
2. Do not override A/C or (recirculated air).
3. Set the temperature to 60°F (16°C).
• Manual operation:
1. Select MAX A/C.
2. Select or .
3. Select (recirculated air) to provide colder airflow.
2009 Escape (204)
Owners Guide, 1st Printing
USA (fus)
Climate Controls
43