Locking the doors, Opening the liftgate glass (if equipped), Car finder – FORD 2009 Escape v.1 User Manual

Page 93: Sounding a panic alarm, Replacing the battery, Locks and security

Advertising
background image

Locking the doors

1. Press

and release to lock all the doors. Assuming all vehicle doors

and the liftgate are properly closed, the park/turn lamps will flash once.

2. Press

and release again within three seconds to confirm that all the

doors and liftgate are closed and locked. Note: The doors will lock again
and the horn will chirp once.

If any of the doors or the liftgate are not properly closed, the horn will
chirp twice and park/turn lamps will not flash when the

control is

pressed.

Opening the liftgate glass (if equipped)

Press

twice within three seconds to open the liftgate glass.

Car finder

Press

twice within three seconds. The horn will chirp and the turn

lamps will flash. It is recommended that this method be used to locate
your vehicle, rather than using the panic alarm.

Sounding a panic alarm

Press

to activate the alarm. To deactivate the feature, press the

control again, turn the ignition to the on or start position, or wait for the
alarm to time out in approximately three minutes.

Note:

The panic alarm will only operate when the ignition is in the off

position.

Replacing the battery

The Integrated Keyhead Transmitter uses one coin type three-volt
lithium battery CR2032 or equivalent.

2009 Escape (204)
Owners Guide, 1st Printing
USA
(fus)

Locks and Security

93

Advertising