Perimeter lighting feature (if equipped), Enabling/disabling the perimeter lighting feature, Locks and security – FORD 2009 F-150 v.1 User Manual

Page 137

Advertising
background image

• after 25 seconds of illumination.
The dome lamp control (if equipped) must not be set to the off position
for the illuminated entry system to operate.

The inside lights will not turn off if:
• they have been turned on with the dimmer control, or
• any door is open.
The battery saver will shut off the interior lamps 10 minutes after the
last door is closed, even if the dimmer control is on.

Perimeter lighting feature (if equipped)

The perimeter lighting feature illuminates the exterior of the vehicle in
order to provide better visibility to the user while he or she approaches
and enters the vehicle.

The perimeter lighting feature activates when:
• the ignition is in the off position,
• the autolamp sensor determines that it is dark, and
• the user activates an unlock feature, using either the remote keyless

transmitter or the keypad.

The perimeter lighting feature will illuminate the headlamps and parking
lamps for 25 seconds, or until:
• the ignition is turned to any position other than the off position, or
• the user activates a lock feature, using either the remote keyless

transmitter or the keypad.

Enabling/disabling the perimeter lighting feature

Your vehicle comes with the perimeter lighting feature enabled. All
vehicle doors must be closed before beginning the procedure. You must
complete Steps 1–5 within 30 seconds, or the procedure will have to be
repeated. If the procedure needs to be repeated, you must wait a
minimum of 30 seconds to begin again.

2009 F-150 (f12)
Owners Guide, 1st Printing
USA
(fus)

Locks and Security

137

Advertising