FORD 2009 F-150 v.1 - Manual (Page 94)

Trailer sway (if equipped)
This feature uses the electronic stability control to mitigate trailer sway.
1. To disable/enable the trailer sway
feature, select this function from the
SETUP menu.
2. Press the SELECT/RESET stem
to turn the trailer sway on or off.
Language
Note: When entering the SETUP
MENU and a non-English language
has been selected, “PRESS RESET
FOR ENGLISH” will be displayed to
change back to English.
1. Select this function from the SETUP menu.
2. Press and hold the SELECT/RESET stem to select a new language.
Selectable languages are English, Spanish and French
3. Press the SELECT/RESET stem for the next SETUP menu item or
wait for more than four seconds to return to the INFO menu.
Reset to English (if in another language)
When entering the SETUP menu
and a non-English language has
been selected, HOLD RESET FOR
ENGLISH will be displayed.
Press and hold the SELECT/RESET
stem to set the language choice.
System check
Press and hold the SELECT/RESET stem to get into the system check
sequence from the INFO menu for the following items:
The message center will cycle through each of the systems being
monitored. For each of the monitored systems, the message center will
indicate either an OK message or a warning message for two seconds.
The sequence of the system check report and how it appears in the
message center is as follows:
1. XXX% OIL LIFE
2. CHARGING SYSTEM
2009 F-150 (f12)
Owners Guide, 1st Printing
USA (fus)
Driver Controls
94