FORD 2009 F-150 v.1 - Manual (Page 207)

The tether strap anchors in your vehicle are in the following positions
(shown from top view):
• F150 Regular Cab
• F150 CrewCab and SuperCab
Attach the tether strap only to the appropriate tether anchor as shown.
The tether strap may not work properly if attached somewhere other
than the correct tether anchor.
Once the child safety seat has been installed using either the safety belt,
the lower anchors of the LATCH system, or both, you can attach the top
tether strap.
Front seat tether strap attachment
1. Route the child safety seat tether strap over the back of the seat and
under the head restraint.
For vehicles with adjustable head restraints, route the tether strap under
the head restraint and between the head restraint posts, otherwise route
the tether strap over the top of the seatback.
2. Locate the correct anchor for the selected seating position.
• You may need to pull the seatback forward to access the tether
anchors. Make sure the seatback is locked in the upright position
before installing the child seat.
2009 F-150 (f12)
Owners Guide, 1st Printing
USA (fus)
Seating and Safety Restraints
207